2005 Infiniti G35 xFACTORY OEM SERVICE PROCEDURE

Engine Coolant Temperature Sensor

  1. Check resistance between engine coolant temperature sensor terminals 1 and 2 as shown in the figure.
    Fig 1: Checking Resistance Between Engine Coolant Temperature Sensor Terminals 1 And 2
    G02348405Courtesy of NISSAN MOTOR CO., U.S.A.

    < Reference data > 

    ENGINE COOLANT TEMPERATURE SENSOR REFERENCE DATA

    Engine coolant temperature °C (°F) Resistance kΩ
    20 (68) 2.1 - 2.9
    50 (122) 0.68 - 1.00
    90 (194) 0.236 - 0.260
  2. If NG, replace engine coolant temperature sensor.
    Fig 2: Engine Coolant Temperature Sensor Temperature/Resistance
    G02348406Courtesy of NISSAN MOTOR CO., U.S.A.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.