2005 Infiniti FX45FACTORY OEM SERVICE PROCEDURE

Changing Settings Using Display Unit

The settings of the Intelligent Key system can be changed, using CONSULT-II, display unit, Intelligent Key and door request switch in the center of the instrument panel. Refer to "VEHICLE ELECTRONIC SYSTEMS ".

x: Applicable -: Not applicable

SETTING ITEM DESCRIPTION

Setting item Description
Intelligent Key Lock Response-Sound The sound pattern of the Intelligent Key operation can be set as desired. (Setting value: OFF, Beeper or Horn chirp)
Intelligent Key Unlock Response-Beep Sound The beep sound when unlocking door with the Intelligent Key operation can be turned ON or OFF.
Intelligent Key Engine Start Function This function can be performed to ON or OFF.
Intelligent Key Lock/Unlock Function The door handle request switch lock/unlock operation with the Intelligent Key can be canceled or activated.
Return All Settings to Default The all settings made by VEHICLE ELECTRONICS will return to default.
NOTE: Once a function setting is changed, it will remain effective even if the battery is disconnected.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.