2004 Infiniti Q45FACTORY OEM SERVICE PROCEDURE

5. Check Fuel Pressure

  1. Release fuel pressure to zero. Refer to FUEL PRESSURE RELEASE  .
  2. Install fuel pressure gauge and check fuel pressure. Refer to FUEL PRESSURE CHECK  .
    1. At idling: 350 kPa (3.57 kg/cm 2 , 51 psi) 

OK or NG 

OK: GO TO 7. CHECK MASS AIR FLOW SENSOR .

NG: GO TO 6.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.