2004 Infiniti Q45FACTORY OEM SERVICE PROCEDURE

Anti-Pinch System

Driver's door control unit (LCU01)/passenger, rear LH, RH door control unit monitor the power window motor operation and the power window position (full closed or other) by the signals from encoder and limit switch in power window motor.

When driver's door control unit (LCU01)/passenger, rear LH RH door control unit detect interruption during the following close operation in the each door, driver's door control unit (LCU01)/passenger, rear LH, RH door control unit control each power window motor for open and the power window will be lowered about 150 mm (5.91 in).

  • Automatic close operation when ignition switch is in the "ON" position
  • Automatic close operation during power window timer operation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.