2004 Infiniti M45FACTORY OEM SERVICE PROCEDURE

With GST

NOTE: Be sure to read the explanation of SRT DRIVING PATTERNΒ , before driving vehicle.
  1. Start engine.
  2. Drive vehicle according to SRT DRIVING PATTERNΒ .
  3. Stop vehicle.
  4. Select "MODE 1" with GST.
    • If SRT of EVAP system is not set yet, go to the following step.
    • If SRT of EVAP system is set, the result will be OK.
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Start engine.

    It is not necessary to cool engine down before driving.Β 

  7. Drive vehicle again according to the SRT DRIVING PATTERNΒ .
  8. Stop vehicle.
  9. Select "MODE 3" with GST.
  10. Select "MODE 1" with GST.
    • If SRT of EVAP system is set, the result will be OK.
    • If SRT of EVAP system is not set, go to step 6.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.