Perform DTC CONFIRMATION TEST under corresponding DTC test under DIAGNOSTIC TESTS. If more than on SRT item needs to be set, perform DTC confirmation tests in order of priority. See SYSTEM READINESS TEST PRIORITY table.

SYSTEM READINESS TEST PRIORITY

SRT Item (CONSULT-II Display)

Priority

Required Self-Diagnostic Items

Corresponding DTC

CATALYST

3-Way Catalyst Function

P0420, P0430

EVAP SYSTEM

⁽¹⁾ EVAP Control System

P0442

EVAP SYSTEM

⁽²⁾ EVAP Control System

P0456/P1456

EVAP SYSTEM ⁽³⁾

EVAP Control System

P0441

HO2S

HO2S 1

P0134, P0154

HO2S

⁽⁴⁾ HO2S 1

P0143, P0163

HO2S

⁽⁵⁾ HO2S 1

P0144, P0164

HO2S

⁽⁶⁾ HO2S 1

P1133, P1153

HO2S

⁽⁷⁾ HO2S 1

P1132, P1152

HO2S

⁽⁸⁾ HO2S 2

P0146, P0166

HO2S

⁽⁹⁾ HO2S 2

P0147, P0167

HO2S

⁽¹⁰⁾ HO2S 2

P1139, P1159

HO2S

⁽¹¹⁾ HO2S 2

P1138, P1158

HO2S HTR

HO2S 1 Heater

P0031, P0032, P0051, P0052

HO2S HTR

HO2S 2 Heater

P0037, P0038, P0057, P0058

⁽¹⁾	Small leak detected, negative pressure.

⁽²⁾	Very small leak detected, negative or positive pressure.

⁽³⁾	Purge flow monitoring.

⁽⁴⁾	Lean shift monitoring.

⁽⁵⁾	Rich shift monitoring.

⁽⁶⁾	Response monitoring.

⁽⁷⁾	High voltage.

⁽⁸⁾	Minimum voltage monitoring.

⁽⁹⁾	Maximum voltage monitoring.

⁽¹⁰⁾	Response monitoring.

⁽¹¹⁾	High voltage.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Setting SRT Codes (Using CONSULT-II)

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?