Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Check Electronic Key
- CHECK ELECTRONIC KEY
With CONSULT-II
Check Electronic key "LOCK / UNLOCK BUTTON", "TRUNK BTN-CON" and "PANIC BTN" in "DATA MONITOR" mode with CONSULT-II.
Without CONSULT-II
Check electronic key in "SWITCH MONITOR" mode. refer to "SWITCH MONITOR ".
OK or NG
- OK >> Electronic key is OK.
- NG >> GO TO 2.
- CHECK ELECTRONIC KEY ID
With CONSULT-II
Check electronic key "ID Code" in "WORK SUPPORT" mode with CONSULT-II.
Refer to "PROCEDURE 2 (WITH CONSULT-II) ".
Without CONSULT-II
Check electronic key "ID Code" in "REMOTE CONTROLLER ID SET UP" mode.
Refer to "PROCEDURE 1 (WITHOUT CONSULT-II) ".
OK or NG?
- OK >> Electronic key was not registered.
- NG >>
- Check remote keyless entry receiver.
Refer to "CHECK REMOTE KEYLESS ENTRY RECEIVER ".
- Check electronic key battery.
Refer to "CHECK ELECTRONIC KEY BATTERY ".
- Check remote keyless entry receiver.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.