Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description: Notes
Power is supplied at all times:
- from 40A fusible link (letter I , located in the fuse and fusible link box)
- to circuit breaker terminal 1
- through circuit breaker terminal 2
- to power window relay terminal 3
- to front power window main switch terminal 4
- to front power window switch RH terminal 6
- from 10A fuse [No. 13, located in the fuse block (J/B)]
- to smart entrance control unit terminal 49
With ignition switch in ON or START position, power is supplied:
- through 10A fuse [No. 10, located in the fuse block (J/B)]
- to rear power window switch LH and RH terminal 7
- to smart entrance control unit terminal 27
Ground is supplied to power window relay terminal 1:
- through body grounds M9, M25 and M87
Ground is supplied to rear power window switch LH terminal 8:
- through body grounds B7 (with TCS) or B78 (with VDC) and B46 (with rear sunshade), or B12 (without rear sunshade)
Ground is supplied to rear power window switch RH terminal 8:
- through body grounds B 106 and B 127
The power window relay is energized and power is supplied:
- through power window relay terminal 5
- to front power window main switch terminal 11,
- to front power window switch RH terminal 13,
- to rear power window switch LH and RH terminals 5
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.