2003 Infiniti FX45FACTORY OEM SERVICE PROCEDURE

CONSULT-II Function: Notes

The following functions are performed by combining data received and command transmitted via the communication line from the driver seat control unit.

CONSULT-II Function

CONSULT-II diagnosis items Inspection item, self-diagnosis mode Content
AUTO DRIVE POSITIONER WORK SUPPORT(1) Changes the setting for each function.
SELF-DIG RESULTS Check the self-diagnosis results.
DATE MONITOR CAN DIAGNOSTIC SUPPORT MONITOR The results of transmit/receive diagnosis of CAN communication can be read.
Selection from menu Displays the input data to driver seat control unit and automatic driving positioned control unit on real-time basis.
ACTIVE TEST(3) Gives a drive signal to a load to check the operation.
DRIVER SEAT CONTROL UNIT PART NUMBER Displays driver seat control unit part No.
BCM(2) DATA MONITOR Selection from menu Displays the input data to BCM on real-time basis
(1) For setting seat functions only.
(2) Refer to DATA MONITOR .
(3) During vehicle driving, do not perform active test.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.