Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Infiniti FX35 AWDFACTORY OEM SERVICE PROCEDURE
Generator Specifications: FX45
GENERATOR SPECIFICATIONS (FX45)
| Application | Specification | |
|---|---|---|
| Generator Model | LR1110-716, HITACHI | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1100 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1800 RPM | 70 Amps | |
| At 2500 RPM | 91 Amps | |
| At 5000 RPM | 110 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.31 Ohms | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.