2001 Infiniti Q45 BaseFACTORY OEM SERVICE PROCEDURE

Service Data And Specifications (SDS): Alternator

Alternator Service Data And Specifications (SDS)

Type LR1110-707J
HITACHI make
Nominal rating V-A 12--110
Ground polarity Negative
Minimum revolution under no-load (When 13.5 volts is applied) rpm Less than 950
Hot output current (When 13.5 volts is applied) A/rpm More than 34/1,300
More than 82/2,500
More than 105/5,000
Regulated output voltage V 14.1 - 14.7
Minimum length of brush mm (in) 6.0 (0.236)
Brush spring pressure N (g, oz) 1.000 - 3.432 (102 - 350,3.60 - 12.34)
Slip ring minimum outer diameter mm (in) 26.0 (1.024)
Rotor (Field coil) resistance Ξ© 2.31
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.