2000 Infiniti QX4FACTORY OEM SERVICE PROCEDURE

Exhaust Gas RECIRCULATION (EGR): Notes

PCM controls EGR system based on engine operating conditions. On Maxima and Sentra, PCM controls ground circuits for EGR Volume Control Valve (EGR-VCV). On all models except Maxima and Sentra, PCM controls ground circuit for EGR Control (EGRC) solenoid. See Fig 1 and Fig 2 . EGR-VCV or EGRC solenoid remains closed under certain conditions including the following:

  • Engine stopped.
  • Engine starting.
  • Engine idling.
  • Low engine coolant temperature.
  • Excessively high engine coolant temperature.
  • High engine speed.
  • Mass airflow sensor malfunction.

Fig 1: EGR System & Components (Except Maxima & Sentra)
G98I11708Courtesy of NISSAN MOTOR CO., U.S.A.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.