Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Infiniti Q45 BaseFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS (G20)
| Application | Preferred | Range | |||||
|---|---|---|---|---|---|---|---|
| Camber (1) | |||||||
| Front | 0 | -.75 To .75 | |||||
| Rear | -1.30 | -2.05 To .55 | |||||
| Caster (1) | |||||||
| Front | 1.92 | 1.17 To 2.67 | |||||
| Toe-In (2) | |||||||
| Front | .04 (1) | 0 To .08 (0 To 2) | |||||
| Rear | .16 (2) | 0 To .31 (0 To 8) | |||||
| Toe-In (1) | |||||||
| Front | .10 | 0 To .20 | |||||
| Rear | .40 | 0 To .80 | |||||
| Toe-Out On Turns (1) | |||||||
| Inner | 34 | 31 To 35 | |||||
| Outer | 29 | ..... | |||||
|
|||||||
WHEEL ALIGNMENT SPECIFICATIONS (I30)
| Application | Preferred | Range | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Camber (1) | |||||||||||
| Front | -.25 | -1 To .5 | |||||||||
| Rear | -1 | -1.75 To -.25 | |||||||||
| Caster (1) | |||||||||||
| Front | 2.75 | 2 To 3.5 | |||||||||
| Toe-In (2) | |||||||||||
| Front | .04 (1) | 0 To .8 (0 To 2) | |||||||||
| Front (3) | .08 (2) | .04 To .12 (1 To 3) | |||||||||
| Rear | .04 (1) | -.12 To .20 (-3 To 5) | |||||||||
| Toe-In (1) | |||||||||||
| Front (3) | .18 | .09 To .27 | |||||||||
| Front (4) | .10 | 0 To .20 | |||||||||
| Rear | .09 | -.27 To .43 | |||||||||
| Toe-Out On Turns (1) | |||||||||||
| Inner, With 215/55 R16 Tires | 39.5 | 36-4.5 | |||||||||
| Inner, With 225/50 R17 Tires | 33 | 29.5-34 | |||||||||
| Outer, With 215/55 R16 Tires | 32 | ..... | |||||||||
| Outer, With 225/50 R17 Tires | 28.5 | ..... | |||||||||
|
|||||||||||
WHEEL ALIGNMENT SPECIFICATIONS (Q45)
| Application | Preferred | Range | |||||
|---|---|---|---|---|---|---|---|
| Camber (1) | |||||||
| Front | -.67 | -1.42 To -.08 | |||||
| Rear | -.75 | -1.25 To -.25 | |||||
| Caster (1) | |||||||
| Front | 6.42 | 5.67 To 7.17 | |||||
| Toe-In (2) | |||||||
| Front | .08 (2) | .04 To .12 (1 To 3) | |||||
| Rear | .098 | 0 To .20 (0 To 4) | |||||
| Toe-In (1) | |||||||
| Front | .17 | .07 To .27 | |||||
| Rear | .23 | 0 To .47 | |||||
| Toe-Out On Turns (1) | |||||||
| Inner | 39.83 | 36.83-4.83 | |||||
| Outer | 32.42 | ..... | |||||
|
|||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.