Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Setting SRT Codes
To set all SRT codes as complete, drive vehicle according to procedure shown in illustration. See Fig 1. Perform driving procedure one or more times. If driving procedure is interrupted, repeat procedure. On A/T models, operate vehicle with shift lever in "D" position and overdrive turned on. On M/T models, shift gears at suggested speeds. See SUGGESTED SHIFT SPEEDS (M/T) table. DO NOT exceed maximum suggested speed in any gear. See MAXIMUM SPEED FOR EACH GEAR table.
| Gear Change | Shift Speed (MPH) |
|---|---|
| 1st To 2nd | 15 |
| 2nd To 3rd | 25 |
| 3rd To 4th | 40 |
| 4th To 5th | 45 |
| Gear | Speed (MPH) |
|---|---|
| 1st | 35 |
| 2nd | 60 |
| 3rd | 85 |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.