1999 Infiniti Q45 BaseFACTORY OEM SERVICE PROCEDURE

All Remote Controller Functions Inoperative

  1. Check remote controller battery. Perform diagnostic procedure 1. See Figure . If remote controller battery is okay, go to next step. If remote controller battery is defective, replace remote controller battery.
  2. Enter Identity (ID) code of a different or new remote controller. See PROGRAMMING REMOTE CONTROLLERΒ  . If Nissan CONSULT scan tool was used for programming, go to next step. If Nissan CONSULT scan tool was not used for programming, go to step Β 4 .
  3. If ID code cannot be entered, perform diagnostic procedure 2. See Figure . If ID code can be entered, retest system. If system functions normally, replace multi-remote controller. If system does not function normally, perform diagnostic procedure 3. See Figure and Figure .
  4. If ID code can be entered, replace multi-remote controller. If ID code cannot be entered, perform diagnostic procedures 2 and 3. See Figure , Figure and Figure .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.