1990 Infiniti M30FACTORY OEM SERVICE PROCEDURE

Timing Advance System

Ignition timing advance is controlled by ECU based upon sensor input signals which reflect ignition timing needs. If timing problems are experienced, inspect input signals for proper operation. See TIMING ADVANCE SYSTEM INPUT SIGNALS table. To check these input signals, see ENGINE SENSORS & SWITCHES in this article or ECU pin voltage charts in PIN VOLTAGE CHART S article.

TIMING ADVANCE SYSTEM INPUT SIGNALS

Application Model Usage
A/C Clutch Signal (1) Q45
Airflow Meter M30 & Q45
Battery Voltage M30 & Q45
Coolant Temperature M30 & Q45
Crank Angle Sensor M30 & Q45
Ignition Switch START Signal M30 & Q45
Park/Neutral Signal (2) Q45
Power Steering Oil Pressure Switch Q45
Throttle Position Sensor & Idle Switch M30 & Q45
Vehicle Speed Sensor M30 & (3) Q45
(1) Signal received from automatic A/C amplifier.
(2) Signal received from P/N relay.
(3) Signal received from transmission control unit.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.