Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Hyundai Tucson Plug-In Hybrid LimitedFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 1.6L Eng,Mfr Body CD NX4 PHEV | Front | 5.29 OZS. | 0.15 L | POE | Approximate capacity. | S |
| Air Cond Refrigerant | 1.6L Eng,Mfr Body CD NX4 PHEV | Front | 1.43 LBS. | 0.64 KG | R-1234yf | S | |
| Automatic Transmission Fluid | 1.6L Eng | 6.30 QTS. | 5.96 L | SP4M-1, S-OIL ATF SP4M-1 or other brands meeting the specifications approved by Hyundai Motor Co., | S | ||
| Brake Fluid | N/A | N/A | SAE J1704 DOT-4 LV, FMVSS 116 DOT-4, ISO4925 CLASS-6 | S | |||
| Differential Gear Oil | 4WD | Rear | 0.60 QTS. | 0.56 L | Hypoid Gear Oil API - GL-5, SAE 75W-85 (SK HCT-5 Gear Oil 75W-85 or equivalent) | Approximate capacity. | S |
| Engine Coolant | 1.6L Eng | Coolant | 4.95 QTS. | 4.68 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S |
| Engine Coolant | 1.6L Eng | Inverter Coolant | 5.53 QTS. | 5.23 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S |
| Engine Oil | 1.6L Eng | 5.10 QTS. | 4.82 L | SAE 0W-20, API - SN PLUS/SP or ILSAC GF-6 Full Synthetic grade engine oil | S | ||
| Fuel Tank | 1.6L Eng,Mfr Body CD NX4 PHEV | 11.00 GALS. | 41.63 L | S | |||
| Transfer Case Fluid | 0.73 QTS. | 0.69 L | Hypoid Gear Oil API - GL-5, SAE 75W-85 SK HCT-5 Gear Oil SAE 75W-85 or equivalent | Approximate capacity. | S | ||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.