Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Venue SEFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.25 OZS. | 0.12 L | PAG (FD46XG) | S | |||
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | R-134a | S | |||
| Automatic Transmission Fluid | 6.34 QTS. | 5.99 L | CVTF (SP-CVT1) | Use only specified genuine Intelligent variable transmission fluid. The use of nonspecified fluid (even marked as compatible with genuine) could result in shift quality deterioration and vibrations, eventually, the transmission failure. | S | ||
| Brake Fluid | 0.70 QTS. | 0.66 L | SAE J1704 DOT-4 LV, FMVSS 116 DOT-4, ISO4925 CLASS-6 | As required. | S | ||
| Engine Coolant | 6.32 QTS. | 5.98 L | Mixture of antifreeze and water (Phosphate-based Ethylene glycol coolant for aluminum radiator) | S | |||
| Engine Oil | Drain and Refill,w/Filter | 4.02 QTS. | 3.8 L | SAE 0W-20, API - SN PLUS/SP or ILSAC GF-6 Full Synthetic grade engine oil | Requires: API SN PLUS (or above) Full synthetic grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced. | S | |
| Fuel Tank | 11.89 GALS. | 45 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.