2021 Hyundai Venue SEFACTORY OEM SERVICE PROCEDURE

Integrated Central Control Unit DTCS

INTEGRATED CENTRAL CONTROL UNIT DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
B1101-00 Battery Voltage High
B1102-00 Battery Voltage Low
B1603-00 CAN Bus Off
B1621-00 ECU Hard
B2510-00 Head Lamp High RH SCG
B2511-00 Head Lamp High LH SCG
B2512-00 Head Lamp Low RH SCG
B2513-00 Head Lamp Low LH SCG
B2517-00 Internal Tail Lamp Circuit Short To Ground
B251B-00 Bi-Function Head Lamp RH Circuit Short To Ground
B251C-00 Bi-Function Head Lamp LH Circuit Short To Ground
B251D-00 Stop Lamp Right Circuit Short To Ground
B251E-00 Stop Lamp Left Circuit Short To Ground
B251F-00 High Mounted Stop Lamp Short To Ground
B258A-00 External Tail Lamp Front Right Circuit Short To Ground
B258B-00 External Tail Lamp Front Left Circuit Short To Ground
B258C-00 External Tail Lamp Rear Right Circuit Short To Ground
B258D-00 External Tail Lamp Rear Left Circuit Short To Ground
B2610-00 Backup Lamp Short Circuit To Ground
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.