Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Venue SEFACTORY OEM SERVICE PROCEDURE
Fuel Delivery System
FUEL DELIVERY SYSTEM - TIGHTENING TORQUE SPECIFICATIONS
| Item | kgf.m | N.m | lb-ft |
|---|---|---|---|
| Fuel tank installation nut | 4.0 - 5.5 | 39.2 - 53.9 | 28.9 - 39.8 |
| Filler - neck assembly installation bolt | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Filler - neck assembly installation screw | 0.8 - 1.2 | 7.8 - 11.8 | 5.8 - 8.7 |
| Delivery pipe installation bolt | 2.0 - 2.5 | 19.6 - 24.5 | 14.5 - 18.1 |
| Delivery pipe installation nut (↔ Fuel feed tube) | 0.4 - 0.6 | 3.9 - 5.9 | 2.9 - 4.3 |
| Accelerator pedal installation nut | 1.3 - 1.6 | 12.7 - 15.7 | 9.4 - 11.6 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.