2021 Hyundai Veloster TurboFACTORY OEM SERVICE PROCEDURE

Electric Waste Gate Actuator (EWGA): Specifications: Specification

OUTPUT VOLTAGE SPECIFICATION (EWGA POSITION SENSOR)

Position Output Voltage [V] Operating Angle [°] Range of Rod [mm], reference
Mechanical Close end stop Position (MCP) 4.8 0 0
Electrical Close end stop Position (ECP) 4.2 12 1.8
Electrical Open end stop Position (EOP) 1 79 16
Mechanical Open end stop Position (MOP) 0.5 90 18
G13052627Courtesy of HYUNDAI MOTOR AMERICA
G13052628Courtesy of HYUNDAI MOTOR AMERICA
COIL RESISTANCE SPECIFICATION (EWGA DC MOTOR)

Item Specification
Coil Resistance (Ω) 1.44 - 1.96 [21°C (69.8°F)]
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.