Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Veloster N Automatic DCT TransFACTORY OEM SERVICE PROCEDURE
Fuel Delivery System
| Items | Specification | |
|---|---|---|
| Fuel Tank | Capacity | 50 lit. (13.2 U.S.gal., 52.8 U.S.qt., 44.0 Imp.qt.) |
| Fuel Filter | Type | Paper type |
| Fuel Pressure | Low Pressure Fuel Line | 250 - 600 kPa (2.5 - 6.1 kgf/cm, 36.3 - 87.0 psi) |
| High Pressure Fuel Line | 4.0 - 25 MPa (40.9 - 255 kgf/cm, 580.1 - 3626 psi) | |
| Fuel Pump | Type | Electrical, in-tank type |
| Driven by | Electric motor | |
| High Pressure Fuel Pump | Type | Mechanical type |
| Driven by | Camshaft | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.