Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Veloster 2.0, Automatic TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.23 OZS. | 0.12 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Automatic Trans | 7.08 QTS. | 6.7 L | MICHANG ATF SP-IV, SK ATF SP-IV, NOCO ATF SP-IV. HYUNDAI genuine AFT-IV or other brands meeting HYUDAI motor Co. specifications. | S | ||
| Brake Fluid | 0.70 QTS. | 0.66 L | SAE J1704 DOT-4 LV, FMVSS 116 DOT-4, ISO4925 CLASS-6 | S | |||
| Engine Coolant | 2.0L Eng | 6.80 QTS. | 6.43 L | 50/50 mixture of Ethylene Glycol base coolant for aluminum radiator and water | S | ||
| Engine Oil | 2.0L Eng | Drain and Refill,w/Filter | 4.23 QTS. | 4 L | API - SM, ILSAC GF-4 or Above. ACEA A5/B5, SAE 5W-20, 5W-30, 10W-30 | If API service SM engine oil is not available you may use API service SL. If the ACEA A5 engine oil is not available, you may use ILSAC GF-3 (or above) or ACEA A3 (or above). For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-20 (API SM/ILSAC GF-4). | S |
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Manual Transmission Fluid | 2.01 QTS. | 1.9 L | HK SYN MTF 70W (SK) SPIRAX S6 GHME 70W MTF (H.K.SHEELL) GS MTF HD 70W (GS CALTEX) (API- GL-4, SAE 70W TGO-9) | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.