Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Sonata LimitedFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 1.6L Eng | 4.00 OZS. | 0.11 L | PAG (FD46XG) | S | ||
| Air Cond Refrigerant | 1.6L Eng | 1.05 LBS. | 0.47 KG | R-1234yf | S | ||
| Automatic Transmission Fluid | 1.6L Eng | 6.89 QTS. | 6.52 L | MICHANG ATF SP-IV SK ATF SP-IV, NOCA AFT SP-IV, HYUNDAI genuine ATF SP-IV or other brands meeting the specifications approved by Hyundai Motor Co., | S | ||
| Brake Fluid | N/A | N/A | DOT 4 Brake Fluid | Fluid Capacity is between: 0.74 - 0.85 qts. | S | ||
| Engine Coolant | 1.6L Eng | 8.03 QTS. | 7.59 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | |
| Engine Oil | 1.6L Eng | Drain and Refill,w/Filter | 5.07 QTS. | 4.79 L | API - SN PLUS SAE 0W-20 Full synthetic engine oil | If the recommended engine oil is not available in your country, you are able to use API SL/ILSAC GF-3 or ACEA A3. For better fuel economy, it is recommended to use the engine oil of a viscosity grade 0W-20 (API Latest (SN PLUS)). | S |
| Fuel Tank | 1.6L Eng | 14.79 GALS. | 55.98 L | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
