Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Palisade Calligraphy, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.35 OZS. | 0.18 L | PAG | S | |||
| Air Cond Refrigerant | 1.90 LBS. | 0.86 KG | R-1234yf | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | 7.40 QTS. | 7 L | MICHANG ATF SP-IV SK ATF SP-IV, NOCA AFT SP-IV, HYUNDAI genuine ATF SP-IV or other brands meeting the specifications approved by Hyundai Motor Co., | S | |||
| Brake Fluid | N/A | N/A | FMVSS116 DOT 4 Brake Fluid | As required. | S | ||
| Engine Coolant | 9.40 QTS. | 8.89 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | ||
| Engine Oil | Drain and Refill,w/Filter | 6.87 QTS. | 6.5 L | ACEA A5 or above. SAE 5W-30 | For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-30 (ACEA A5). If the ACEA A5 engine oil is not available in your country, you are able to use API SM & ILSAC GF-4 (or above) or API SL & ILSAC GF- | S | |
| Fuel Tank | 18.75 GALS. | 70.97 L | S | ||||
| Transfer Case Fluid | 0.74 QTS. | 0.7 L | Hypoid Gear Oil API - GL-5, SAE 75W-85 SK HCT-5 Gear Oil SAE 75W-85 or equivalent | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.