2021 Hyundai Palisade Calligraphy, FWDFACTORY OEM SERVICE PROCEDURE

VIN Programming Procedure

VIN (Vehicle Identification Number) is a number with the vehicle information (Maker, Vehicle Type, Vehicle Line/Series, Body Type, Engine Type, Transmission Type, Model Year, Plant Location and so forth. For more information, refer to GENERAL INFORMATION ). When replacing an ECM, the VIN must be programmed in the ECM. If there is no VIN in ECM memory, the fault code (DTC P0630) will be set.

CAUTION:
  • VIN cannot be changed once it is programmed. Confirm carefully when writing the VIN.
  1. Select "VIN Writing" function in "Vehicle S/W Management".
  2. Select "Write VIN" in "ID Register" menu.
    G14423800Courtesy of HYUNDAI MOTOR AMERICA
  3. Enter the VIN.
    CAUTION:
    • Before entering the VIN, confirm again as it cannot be changed once programmed.
      G14423801Courtesy of HYUNDAI MOTOR AMERICA
Chapter Navigation
Return to Chapter: Adjustment
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.