WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.

Check for resistance between terminals in left switch position.

Courtesy of HYUNDAI MOTOR AMERICA

CONNECTOR TERMINAL AND RESISTANCE SPECIFICATION

Switch	Connector terminal	Resistance (± 3%)
SEEK Up	1 - 6	430 Ω
SEEK Down	1 - 6	1.1 kΩ
MODE	1 - 6	2.11 kΩ
MUTE	1 - 6	3.11 kΩ
Volume up	1 - 6	4.61 kΩ
Volume down	1 - 6	6.81 kΩ
Voice	1 - 6	10.71 kΩ
END	1 - 6	18.91 kΩ
SEND	1 - 6	40.91 kΩ

Check for resistance between terminals in right switch position.

Courtesy of HYUNDAI MOTOR AMERICA

CONNECTOR TERMINAL AND RESISTANCE SPECIFICATION

Switch	Connector terminal	Resistance (± 3%)
CANCEL	2 - 6	610 Ω
SET (-)	2 - 6	910 Ω
RES (+)	2 - 6	1.38 kΩ
Cruise ON/OFF	2 - 6	2.13 kΩ
Cruise Mode	2 - 6	3.63 kΩ
Smart Cruise	2 - 6	7.93 kΩ
Trip Group	1 - 6	610 Ω
Trip Up	1 - 6	910 kΩ
Trip Down	1 - 6	1.38 kΩ
Trip OK	1 - 6	2.13 kΩ

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Repair Procedures: Inspection

Use the Manual With the Right Hardware

When to See a Mechanic