Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Hyundai Accent LimitedFACTORY OEM SERVICE PROCEDURE
DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| DTC P0106 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance |
| DTC P0107 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit Low Input |
| DTC P0108 | 00: Manifold Absolute Pressure/Barometric Pressure Circuit High Input |
| DTC P0111 | 00: Intake Air Temperature Sensor 1 Circuit Range/Performance |
| DTC P0112 | 00: Intake Air Temperature Sensor 1 Circuit Low Input |
| DTC P0113 | 00: Intake Air Temperature Sensor 1 Circuit High Input |
| DTC P0114 | 00: Intake Air Temperature Sensor 1 Circuit Intermittent Bank 1 |
| DTC P0116 | 00: Engine Coolant Temperature Circuit Range/Performance |
| DTC P0117 | 00: Engine Coolant Temperature Circuit Low Input |
| DTC P0118 | 00: Engine Coolant Temperature Circuit High Input |
| DTC P0119 | 00: Engine Coolant Temperature Circuit Intermittent |
| DTC P011B | 00: Engine Coolant Temperature/Intake Air Temperature Correlation |
| DTC P0121 | 00: Throttle/Pedal Position Sensor/Switch 'A' Circuit Range/Performance |
| DTC P0122 | 00: Throttle/Pedal Position Sensor/Switch 'A' Circuit Low Input |
| DTC P0123 | 00: Throttle/Pedal Position Sensor/Switch 'A' Circuit High Input |
| DTC P0127 | 00: Intake Air Temperature Too High |
| DTC P0130 | 00: O2 Sensor Circuit (Bank 1 Sensor 1) |
| DTC P0131 | 00: O2 Sensor Circuit Low Voltage (Bank 1/Sensor 1) |
| DTC P0132 | 00: O2 Sensor Circuit High Voltage (Bank 1/Sensor 1) |
| DTC P0133 | 00: O2 Sensor Circuit Slow Response (Bank 1 Sensor 1) |
| DTC P0134 | 00: O2 Sensor Circuit No Activity Detected (Bank 1/Sensor 1) |
| DTC P0135 | 00: O2 Sensor Heater Circuit (Bank 1/Sensor 1) |
| DTC P0136 | 00: O2 Sensor Circuit (Bank 1/Sensor 2) |
| DTC P0137 | 00: O2 Sensor Circuit Low Voltage (Bank 1/Sensor 2) |
| DTC P0138 | 00: O2 Sensor Circuit High Voltage (Bank 1/Sensor 2) |
| DTC P013A | 00: O2 Sensor Slow Response - Rich to Lean Bank 1 Sensor 2 |
| DTC P013B | 00: O2 Sensor Slow Response - Lean to Rich Bank 1 Sensor 2 |
| DTC P013E | 00: O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2 |
| DTC P013F | 00: O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 2 |
| DTC P0171 | 00: System Too Lean (Bank 1) |
| DTC P0172 | 00: System Too Rich (Bank 1) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
