2020 Hyundai Elantra GT BaseFACTORY OEM SERVICE PROCEDURE

Connector [K]

Pin No Description Connected to
1 ECM ground Chassis ground
2 ECM ground Chassis ground
3 ECM ground Chassis ground
4 Battery power (B+) Main relay
5 Battery power (B+) Battery
6 Battery power (B+) Battery
7 Battery power (B+) Main relay
8 Sensor ground Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
9 Accelerator Position Sensor (APS) 1 signal input Accelerator Position Sensor (APS) 1
10 Sensor ground Accelerator Position Sensor (APS) 2
11 -  
12 Sensor ground Fuel Tank Pressure Sensor (FTPS)
13 -  
14 Throttle Position Sensor (TPS) 1 signal input Throttle Position Sensor (TPS) 1
15 -  
16 -  
17 Fuel Level signal input Fuel Level Sender (FLS)
18 Sensor power (+5V) Accelerator Position Sensor (APS) 2
19 -  
20 Sensor power (+5V) Rail Pressure Sensor (RPS)
A/C Pressure Transducer (APT)
21 -  
22 Wiper switch signal input Wiper switch
23 -  
24 Alternator PWM signal output Alternator
25 -  
26 -  
27 -  
28 -  
29 Ignition switch signal input  
30 Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] signal input Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
31 Accelerator Position Sensor (APS) 2 signal input Accelerator Position Sensor (APS) 2
32 Sensor ground Accelerator Position Sensor (APS) 1
33 -  
34 -  
35 Sensor ground Throttle Position Sensor (TPS)
36 Throttle Position Sensor (TPS) 2 signal input Throttle Position Sensor (TPS) 2
37 -  
38 -  
39 Sensor power (+5V) Throttle Position Sensor (TPS) 1, 2
40 Sensor power (+5V) Accelerator Position Sensor (APS) 1
41 Sensor power (+5V) Manifold Absolute Pressure Sensor (MAPS)
Fuel Tank Pressure Sensor (FTPS)
42 Sensor power (+5V) Camshaft Position Sensor (CMPS) [Bank 1/Intake]
Camshaft Position Sensor (CMPS) [Bank 1/Exhaust]
43 -  
44 -  
45 A/C Pressure Transducer (APT) signal input A/C Pressure Transducer (APT)
46 Vehicle speed signal input Vehicle Speed Sensor
47 -  
48 -  
49 -  
50 -  
51 -  
52 VS-/IP- (Common Ground for VS, IP) Heated Oxygen Sensor [Bank 1/Sensor 1]
53 Rc/Rp (Pump Cell Voltage) Heated Oxygen Sensor [Bank 1/Sensor 1]
54 -  
55 -  
56 -  
57 -  
58 Rail Pressure Sensor (RPS) signal input Rail Pressure Sensor (RPS)
59 -  
60 Start signal input PDM module
61 -  
62 CCP-CAN [Low] Other control module, Data Link Connector (DLC), Multi-Purpose Check Connector
63 CAN [Low] Other control module, Data Link Connector (DLC), Multi-Purpose Check Connector
64 Sensor ground Camshaft Position Sensor (CMPS) [Bank 1/Exhaust]
65 Camshaft Position Sensor (CMPS) [Bank 1/Exhaust] signal input Camshaft Position Sensor (CMPS) [Bank 1/Exhaust]
66 -  
67 Sensor ground Crankshaft Position Sensor (CKPS)
68 -  
69 -  
70 -  
71 -  
72 Purge Control Solenoid Valve (PCSV) control output Purge Control Solenoid Valve (PCSV)
73 -  
74 VS+ (NERNST Cell Voltage) Heated Oxygen Sensor [Bank 1/Sensor 1] [EURO 5/6 Only]
75 Rc (Compensated Resistance) Heated Oxygen Sensor [Bank 1/Sensor 1] [EURO 5/6 Only]
76 Sensor ground Rail Pressure Sensor (RPS)
77 Sensor ground A/C Pressure Transducer (APT)
78 Sensor ground Manifold Absolute Pressure Sensor (MAPS)
79 Intake Temperature Sensor (IATS) signal input Intake Temperature Sensor (IATS)
80 Manifold Absolute Pressure Sensor (MAPS) signal input Manifold Absolute Pressure Sensor (MAPS)
81 -  
82 -  
83 Immobilizer communication line Smart Key Control Module [With Button Engine Start System]
Immobilizer Control Module [Without Button Engine Start System]
84 CCP-CAN [High] Other control module, Data Link Connector (DLC), Multi-Purpose Check Connector
85 CAN [High] Other control module, Data Link Connector (DLC), Multi-Purpose Check Connector
86 Camshaft Position Sensor (CMPS) [Bank 1/Intake] signal input Camshaft Position Sensor (CMPS) [Bank 1/Intake]
87 Sensor ground Camshaft Position Sensor (CMPS) [Bank 1/Intake]
88 -  
89 Crankshaft Position Sensor signal input Crankshaft Position Sensor (CKPS)
90 Fuel pump relay control output (With Immobilizer) Fuel pump relay
91 -  
92 -  
93 Main relay control output Main relay
94 Start relay (Low) control output Start relay
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.