Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Hyundai Ioniq Plug-In HybridFACTORY OEM SERVICE PROCEDURE
Fuel Delivery System
TIGHTENING TORQUES SPECIFICATIONS - FUEL DELIVERY SYSTEM
| Item | kgf.m | N.m | Ib-ft |
|---|---|---|---|
| Fuel tank installation nut | 4.0 - 5.5 | 39.2 - 54.0 | 28.9 - 39.8 |
| Filler-neck assembly bracket installation nut | 0.8-1.2 | 7.8-11.8 | 5.8-8.7 |
| Filler-neck assembly bracket installation screw | 0.8-1.2 | 7.8-11.8 | 5.8-8.7 |
| Accelerator pedal module installation nut | 1.3-1.6 | 12.8-15.7 | 9.4-11.6 |
| Accelerator pedal module installation bolt | 0.9 - 1.4 | 8.8-13.7 | 6.5-10.1 |
| Delivery pipe installation bolt | 1.9-2.4 | 18.6-23.5 | 13.7-17.4 |
| High pressure fuel pump function block installation bolt | 1.0 - 1.2 | 9.8-11.8 | 7.2-8.7 |
| High pressure fuel pump installation bolt | 1.3-1.5 | 12.8-14.7 | 9.4-10.9 |
| High pressure fuel pipe installation nut | 2.7 - 3.3 | 26.5 - 32.4 | 19.5-23.9 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.