Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC P0461: Fuel Level Sensor 'A' Circuit Range/Performance: Specification
2017 Hyundai Santa Fe SE, FWDSECTION Specification
DIGITAL CLUSTER SPECIFICATIONS
| FLS | Normal Parameter | |||||
|---|---|---|---|---|---|---|
| Float position | 12/12 | 9/12 | 6/12 | 4/12 | 2/12 | Warning Lamp ON |
| Sender-Resistance (Ω) | 15.0±2 | 36.0±2 | 66.2±2 | 97.5±2 | 142.0±2 | 170.0±2 |
| Fuel volume (l ) | 67.2 (17.7 gal) | 52.8 (13.9 gal) | 38.4 (10.1 gal) | 28.8 (7.6 gal) | 16.9 (4.4 gal) | 9.7 (2.5 gal) |
ANALOG CLUSTER SPECIFICATIONS
| FLS | Normal Parameter | |||||
|---|---|---|---|---|---|---|
| Float position | 8/8 | 6/8 | 1/2 | 3/8 | 1/8 | Warning Lamp ON |
| Sender-Resistance (Ω) | 15.0±2 | 36.0±2 | 66.2±2 | 86.0±2 | 142.0± | 170.0±2 |
| Fuel volume (l ) | 67.2 (17.7 gal) | 52.8 (13.9 gal) | 38.4 (10.1 gal) | 31.3 (8.2 gal) | 16.9 (4.4 gal) | 9.7 (2.5 gal) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.