Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Hyundai Genesis 5.0FACTORY OEM SERVICE PROCEDURE
TCM Terminal Function
CONNECTOR PIN REFERENCE
| Pin | Description | Pin | Description |
|---|---|---|---|
| 1 | Battery power | 48 | - |
| 2 | Battery power | 49 | - |
| 3 | Power(IG 1) | 50 | 27 Brake control solenoid valve |
| 4 | Ground | 51 | - |
| 5 | Ground | 52 | ON/OFF solenoid valve |
| 6 | Ground | 53 | - |
| 7 | - | 54 | Input speed sensor signal |
| 8 | - | 55 | Middle speed sensor signal |
| 9 | - | 56 | Output speed sensor signal |
| 10 | - | 57 | - |
| 11 | - | 58 | - |
| 12 | - | 59 | - |
| 13 | Inhibitor switch signal "S1" | 60 | - |
| 14 | Oil temperature sensor (+) | 61 | Sports mode select switch |
| 15 | - | 62 | - |
| 16 | Sports mode up switch | 63 | - |
| 17 | Sports mode down switch | 64 | - |
| 18 | - | 65 | CAN communication line (LOW) |
| 19 | - | 66 | - |
| 20 | - | 67 | - |
| 21 | Inhibitor switch signal "S2" | 68 | - |
| 22 | Inhibitor switch signal "S4" | 69 | - |
| 23 | Inhibitor switch signal "S3" | 70 | Solenoid supply power 2 |
| 24 | - | 71 | - |
| 25 | - | 72 | - |
| 26 | - | 73 | Solenoid supply power (4 & OD/C, 35R/C, 6/C, L/P) |
| 27 | - | 74 | - |
| 28 | - | 75 | - |
| 29 | Solenoid supply power (UD/C, 27/B, 8LR/B, D/C) | 76 | - |
| 30 | Input speed sensor power | 77 | - |
| 31 | Middle speed sensor power | 78 | - |
| 32 | - | 79 | - |
| 33 | - | 80 | - |
| 34 | - | 81 | - |
| 35 | - | 82 | - |
| 36 | - | 83 | - |
| 37 | - | 84 | - |
| 38 | Oil temperature sensor (-) | 85 | CCP CAN Low |
| 39 | - | 86 | CCP CAN High |
| 40 | - | 87 | CAN communication line (High) |
| 41 | 35R Clutch control solenoid valve | 88 | - |
| 42 | 8LR Brake control solenoid valve | 89 | - |
| 43 | Underdrive clutch control solenoid valve | 90 | - |
| 44 | 6 Speed clutch control solenoid valve | 91 | - |
| 45 | Line pressure control solenoid valve | 92 | - |
| 46 | Damper clutch control solenoid valve | 93 | Output speed sensor power |
| 47 | 4 & OD Clutch control solenoid valve | 94 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.