Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Hyundai Genesis 3.8, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.30 OZS. | 0.12 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.43 LBS. | 0.64 KG | R-134a | S | |||
| Automatic Transmission Fluid | 3.8L Eng | 11.09 QTS. | 10.49 L | GS ATF SP-IV-RR, HYUNDAI Genuine ATF SP-IV-RR or other brands meeting the specification approved by Hyundai Motor Co. | S | ||
| Brake Fluid | 0.75 QTS. | 0.7 L | FMVSS116 DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | AWD | Front | 1.48 QTS. | 1.4 L | Hypoid Gear Oil API GL-5, SAE 75W-90 | SHELL SPIRAX X or equivalent. | S |
| Differential Gear Oil | Rear | 1.48 QTS. | 1.4 L | Hypoid Gear Oil API GL-5, SAE 75W-90 | SHELL SPIRAX X or equivalent. | S | |
| Engine Coolant | 3.8L Eng | 8.88 QTS. | 8.4 L | Mixture of antifreeze and distilled water (Ethylene Glycol base coolant for aluminum radiator) | S | ||
| Engine Oil | 3.8L Eng | Drain and Refill,w/Filter | 7.29 QTS. | 6.89 L | API - SM, ILSAC GF-4 or Above, SAE 5W-30, SAE 10W-30 Above 0Deg F (-18Deg C) | For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-30 (API SM/ILSAC GF-4). | S |
| Fuel Tank | 20.34 GALS. | 76.99 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.