2016 Hyundai Azera LimitedFACTORY OEM SERVICE PROCEDURE

Variant coding Procedure

■ On-Line type on GDS 

  1. Ignition "OFF", connect GDS.
  2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
  3. Select Variant coding mode.
  4. Follow steps on the screen as in illustrations below.
  1. Initial ACU Variant Coding screen
    Fig 1: Display - Initial ACU Variant Coding Screen
    G10368041Courtesy of HYUNDAI MOTOR AMERICA
  2. VIN Code entering screen
    Fig 2: Display - VIN Code Entering Screen
    G10368042Courtesy of HYUNDAI MOTOR AMERICA
  3. Variant coding's proceeding screen-1
    Fig 3: Display - Variant Coding Proceeding Screen-1
    G10368043Courtesy of HYUNDAI MOTOR AMERICA
  4. Variant coding's proceeding screen-2
    Fig 4: Display - Variant Coding Proceeding Screen-2
    G10368044Courtesy of HYUNDAI MOTOR AMERICA
  5. Variant coding is completed
    Fig 5: Display - Variant Coding Completed Screen
    G10368045Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
  1. This screen is opened when you try the variant coding again on the SRSCM which has bee performed variant coding.
    Fig 6: Display - ACU Coding Completed Screen
    G10368046Courtesy of HYUNDAI MOTOR AMERICA
  2. Screen of communication failure
    Fig 7: Display - Communication Failure Screen
    G10368047Courtesy of HYUNDAI MOTOR AMERICA

■ Off-line type on GDS (This can be used when not connecting to internet) 

  1. Initial ACU Variant Coding screen
    Fig 8: Display - Initial ACU Variant Coding Screen
    G10368048Courtesy of HYUNDAI MOTOR AMERICA
  2. ACU Coding Code entering screen
    Fig 9: Display - ACU Coding Code Entering Screen
    G10368049Courtesy of HYUNDAI MOTOR AMERICA
  3. Screen of rechecking ACU Coding code's entering
    Fig 10: Display - ACU Coding Code Entering Rechecking Screen
    G10368050Courtesy of HYUNDAI MOTOR AMERICA
  4. Variant coding's proceeding screen-1
    Fig 11: Display - Variant Coding Proceeding Screen-1
    G10368051Courtesy of HYUNDAI MOTOR AMERICA
  5. Variant coding's proceeding screen-2
    Fig 12: Display - Variant Coding Proceeding Screen-2
    G10368052Courtesy of HYUNDAI MOTOR AMERICA
  6. Variant coding is completed
    Fig 13: Display - Variant Coding Completed Screen
    G10368053Courtesy of HYUNDAI MOTOR AMERICA
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.