Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Hyundai Azera BaseFACTORY OEM SERVICE PROCEDURE
Integrated Memory System (IMS): Specifications: Notes
IMS ELECTRICAL SYSTEM SPECIFICATION
| Item | Specification |
|---|---|
| Rating voltage | DC 12V |
| Operating voltage | DC 9V ~ 16V |
| Operating temperature | -30°C ~ +80°C |
| Maintaining temperature | -40°C ~ +85°C |
| Max, humid | 95% |
| Consumption current | MAX 700mA |
| Dark current | Below 2mA |
MOTOR ELECTRICAL SYSTEM SPECIFICATION
| Item | Specification |
|---|---|
| Rating voltage | 13.5V (Slide, Recline, Front height, Rear height) |
| Current | Slide: 8A |
| Recline: 8A | |
| Front height: 7.5A | |
| Rear height: 7.5A | |
| At worst current | Slide: 24A |
| Recline: 20A | |
| Front height: 25A | |
| Rear height: 27A |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.