Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014VELOSTER RE:FLEXREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 24 (AUDIO/VIDEO/NAVIGATION (AVN) SYSTEM)AVN REMOTE CONTROLREPAIR PROCEDURESREMOVAL
2014 Hyundai Veloster RE:FLEX
Repair procedures: Removal
2014 Hyundai Veloster RE:FLEXSECTION Removal
WARNING: This page is about a different car, the 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the driver airbag module.
(Refer to the "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")
- Remove the steering wheel.
(Refer to the "STEERING COLUMN AND SHAFT ")
- Remove the steering wheel cover (A) after loosening 4 screws.
- Remove the steering wheel remote control switches connectors.
[LH-Audio/Bluetooth + Voice]
Courtesy of HYUN
[RH-Cruise/Trip + Reset]
- Remove the wiring and loosen 5 screws.
- Remove the steering wheel remote control switch assembly (A).
- Remove the bluetooth switch and the trip switch (A) after loosening the screws.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.