2014 Hyundai Veloster Base, Standard TransFACTORY OEM SERVICE PROCEDURE

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • Current Monitoring
  1. Open or short of Wheel speed sensor circuit
  2. Faulty Wheel speed sensor
Enable Conditions
  • When the sensor signal current is continuously out of the specified range of 4 mA ± 10% ~ 22 mA ± 10% for 140 msec.
Fail Safe
  1. Only one wheel failure: Inhibit the ABS/ESC/DBC control, allow the EBD control. The ABS/ESC/DBC warning lamps are activated, the EBD warning lamp is not activated.
  2. More than two wheels failure: The ABS/EBD/ESC/DBC functions are inhibited. The ABS/EBD/ESC/DBC warning lamps are activated.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.