Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014GENESIS 3.8REPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXDRIVER DOOR MODULE DTCS
2014 Hyundai Genesis 3.8
Driver Door Module DTCS
2014 Hyundai Genesis 3.8SECTION Driver Door Module DTCS
DRIVER DOOR MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| DTC B1602 | CAN Error |
| DTC B1603 | CAN Communication Bus Off |
| DTC B1681 | DDM and Rear LH Serial Communication Error |
| DTC B1682 | DDM and Rear RH Serial Communication Error |
| DTC B1910 | Outside Mirror - Left Horizontal Motor or Sensor Error |
| DTC B1911 | Outside Mirror - Left Vertical Motor or Sensor Error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.