Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014EQUUS SIGNATUREREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION CONTROL SYSTEMSHIFT LEVERREPAIR PROCEDURESADJUSTMENTHOW TO ADJUST SHIFT CABLE
2014 Hyundai Equus Signature
How To Adjust Shift Cable
2014 Hyundai Equus SignatureSECTION How To Adjust Shift Cable
- Insert the shift cable to the bracket and hold it with a new clip.
- Align the manual lever hole to the hole on the transmission case and hold the position with a bar.
- Eliminate shift cable free play of the shift cable.
- Firmly hold the special bolt with a spanner and tighten the nut (A) with the specified torque.
Tightening torque:
12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
- Take off the bar holding the manual lever.
- Shifting the each position, check that the shift lever moves smoothly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.