Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2014 Hyundai Equus Signature
Quick Lookups: Fluids
2014 Hyundai Equus SignatureSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.40 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.43 LBS. | 0.64 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.67 QTS. | 10.09 L | GS ATF SP-IV-RR, HYUNDAI Genuine ATF SP-IV-RR or other brands meeting the specification approved by Hyundai Motor Co. | S | |||
| Brake Fluid | 0.75 QTS. | 0.7 L | FMVSS116 DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | 1.48 QTS. | 1.4 L | Hypoid Gear Oil API GL-5, SAE 75W-90 | SHELL SPIRAX X or equivalent. | S | ||
| Engine Coolant | 7.45 QTS. | 7.05 L | Mixture of antifreeze and distilled water (Ethylene Glycol base coolant for aluminum radiator) | S | |||
| Engine Oil | w/Filter | 7.61 QTS. | 7.2 L | API - SM, ILSAC GF-4 or Above, SAE 5W-20, 5W-30, SAE 10W-30 Above 0Deg F (-18Deg C) | If API service SM engine oil is not available you may use API service SL. For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-20 (API SM/ILSAC GF-4). Hyundai recommends Quaker State. | S | |
| Fuel Tank | 20.34 GALS. | 76.99 L | S | ||||
| Power Steering Fluid | 0.95 QTS. | 0.89 L | Pentosin CHF 202 | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.