Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2014 Hyundai Elantra SE, Automatic Trans
Quick Lookups: Fluids
2014 Hyundai Elantra SE, Automatic TransSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.30 OZS. | 0.12 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.71 QTS. | 7.29 L | Automatic Transmission Fluid SP4-M | S | |||
| Brake Fluid | 0.70 QTS. | 0.66 L | FMVSS116 DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Engine Coolant | Automatic Trans | 6.23 QTS. | 5.89 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | |
| Engine Oil | Drain and Refill,w/Filter | 4.23 QTS. | 4 L | API - SM, ILSAC GF-4 or Above, SAE 5W-20, 5W-30, SAE 10W-30 Above 0Deg F (-18Deg C) | If API service SM engine oil is not available you may use API service SL. For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-20 (API SM/ILSAC GF-4). Hyundai recommends Quaker State. | S | |
| Fuel Tank | 12.68 GALS. | 47.99 L | S | ||||
| Manual Transmission Fluid | 2.01 QTS. | 1.9 L | API - GL-4, SAE 75W-85 | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.