General Information: DTC Detecting Condition

2014 Hyundai Azera LimitedSECTION DTC Detecting Condition
Item Detecting Condition Possible cause
DTC Strategy Case 1
  • Compares the time elapsed recorded by the LPC (Low Power Counter) against that recorded by the test timer
  1. PCM
  2. Poor Battery Condition
  3. Connecting condition
Case 2
  • Checks for abnormal resets of the LPC
Enable Conditions Case 1
  • Engine running > 10 sec.
  • Battery voltage > 8V
Case 2
  • No Memory Failure Occurred
Threshold value Case 1
  • The difference between the counter the LPC and the calibration the test timer clocks up > 20 sec.
Case 2
  • The LPC is reset to zero abnormally
Diagnosis Time
  • -
MIL On Condition
  • 2 Drive Cycles
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.