Components and Components Location: Components

2014 Hyundai Azera LimitedSECTION Components
Fig 1: A/V External Amplifier Components Location
G08810969Courtesy of HYUNDAI MOTOR AMERICA
Pin No. Pin name Function Power [W]
A1 Battery + power input 10A
A2 Battery + power input 10A
A3 Battery + power input 10A
A4 - no connect  
A5 CAN + CAN + 20mA
A6 CAN - CAN - 20mA
A7 ACC ACC/IGN input (on/off) 10mA
A8 - no connect  
A9 - no connect  
A10 - no connect  
A11 NAVI + NAVI analog input + 10mA
A12 Subwoofer 2 + speaker output + 30W
A13 Subwoofer 1 + speaker output + 30W
A14 GND power GND 10A
A15 GND power GND 10A
A16 GND power GND 10A
A17 - no connect  
A18 SPDIF+ RS-485(+) 20mA
A19 SPDIF- RS-485(-) 20mA
A20 SPDIF GND RS-485 shield GND 20mA
A21 - no connect  
A22 - no connect  
A23 - no connect  
A24 NAVI - NAVI analog input - 10mA
A25 Subwoofer 2 - speaker output - 30W
A26 Subwoofer 1 - speaker output - 30W
B1 Right Surround + Speaker output + 30W
B2 Left Surround + Speaker output + 30W
B3 Right Side Mid/High + Speaker output + 30W
B4 Left Side Mid/High + Speaker output + 30W
B5 - No connect  
B6 - No connect  
B7 Front Center + Speaker output + 30W
B8 NC No connect  
B9 Right Surround - Speaker output - 30W
B10 Left Surround - Speaker output - 30W
B11 Right Side Mid/High - Speaker output - 30W
B12 Left Side Mid/High - Speaker output - 30W
B13 - No connect  
B14 - No connect  
B15 Front Center - Speaker output - 30W
B16 - No connect  
C1 Right Side Low + Speaker output + 33W
C2 Left Side Low + Speaker output + 33W
C3 Right Front High + Speaker output + 40W
C4 Left Front High + Speaker output + 40W
C5 Right Front Low + Speaker output + 33W
C6 Left Front Low + Speaker output + 33W
C7 Right Side Low - Speaker output - 33W
C8 Left Side Low - Speaker output - 33W
C9 Right Front High - Speaker output - 40W
C10 Left Front High - Speaker output - 40W
C11 Right Front Low - Speaker output - 33W
C12 Left Front Low + Speaker output - 33W
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.