SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014AZERA BASEREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSAXLE CONTROL SYSTEMTRANSAXLE CONTROL MODULE (TCM)SCHEMATIC DIAGRAMSTCM TERMINAL INPUT/OUTPUT SIGNALCONNECTOR [ELG-A]
2014 Hyundai Azera Base

Connector [ELG-A]

2014 Hyundai Azera BaseSECTION Connector [ELG-A]
CONNECTOR (ELG-A) DESCRIPTION

Pin Description Condition Input/output value
Type Level
10 CAN Communication line (HIGH) - - -
29 Sports mode up switch Up ON Input 0V/Battery voltage level
Other 9V < Battery voltage level <16V
35 CAN Communication line (LOW) - - -
44 Inhibitor switch signal "S1" ON Input Battery voltage level
OFF 9V < Battery voltage level <16V
45 Inhibitor switch signal "S2" ON Input Battery voltage level
OFF 9V < Battery voltage level <16V
46 Inhibitor switch signal "S3" ON Input Battery voltage level
OFF 9V < Battery voltage level <16V
47 Inhibitor switch signal "S4" ON Input Battery voltage level
OFF 9V < Battery voltage level <16V
54 Sports mode down switch Up ON Input 0V/Battery voltage level
Other 9V < Battery voltage level <16V
79 Sports mode select switch Sport mode Input 0V/Battery voltage level
Other 9V < Battery voltage level <16V
84 Shift lock solenoid - - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.