2014 Hyundai Azera BaseFACTORY OEM SERVICE PROCEDURE

IDB Terminal Function

CONNECTOR [CLG02] DESCRIPTION

Pin No. Description Connected to
1 -  
2 -  
3 -  
4 -  
5 -  
6 -  
7 -  
8 -  
9 -  
10 -  
11 -  
12 -  
13 -  
14 -  
15 -  
16 Injector (Cylinder #3) [Low] control output Injector (Cylinder #3)
17 Injector (Cylinder #6) [Low] control output Injector (Cylinder #6)
18 Injector (Cylinder #6) [High] control output Injector (Cylinder #6)
19 Injector (Cylinder #2) [Low] control output Injector (Cylinder #2)
20 Injector (Cylinder #5) [Low] control output Injector (Cylinder #5)
21 -  
22 Injector (Cylinder #2) signal input Engine Control Module (ECM)
23 Injector (Cylinder #5) signal input Engine Control Module (ECM)
24 -  
25 Fuel Pressure Control Valve (FPRV) logic input Engine Control Module (ECM)
26 CCP-CAN [Low] Other control module, Data Link Connector (DLC), Multipurpose check connector
27 CCP-CAN [High] Other control module, Data Link Connector (DLC), Multipurpose check connector
28 Battery power (B+) Ignition switch
29 Battery power (B+) Main relay
30 Battery power (B+) Main relay
31 Injector (Cylinder #4) [High] control output Injector (Cylinder #4)
32 Injector (Cylinder #1) [High] control output Injector (Cylinder #1)
33 Injector (Cylinder #3) [High] control output Injector (Cylinder #3)
34 Injector (Cylinder #2) [High] control output Injector (Cylinder #2)
35 Injector (Cylinder #5) [High] control output Injector (Cylinder #5)
36 -  
37 -  
38 Injector (Cylinder #3) signal input Engine Control Module (ECM)
39 -  
40 Injector (Cylinder #6) signal input Engine Control Module (ECM)
41 Injector (Cylinder #4) signal input Engine Control Module (ECM)
42 Battery power (B+) Ignition switch
43 Battery power (B+) Main relay
44 Battery power (B+) Main relay
45 Fuel Pressure Control Valve (FPRV) [High] control output Fuel Pressure Control Valve (FPRV)
46 Injector (Cylinder #4) [Low] control output Injector (Cylinder #4)
47 Injector (Cylinder #1) [Low] control output Injector (Cylinder #1)
48 ECM ground Chassis ground
49 ECM ground Chassis ground
50 ECM ground Chassis ground
51 -  
52 ECM ground Chassis ground
53 ECM ground Chassis ground
54 -  
55 Injector (Cylinder #1) signal input Engine Control Module (ECM)
56 -  
57 -  
58 -  
59 Battery power (B+) Main relay
60 Fuel Pressure Control Valve (FPRV) [Low] control output Fuel Pressure Control Valve (FPRV)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.