Repair Procedures: Removal

2014 Hyundai Azera BaseSECTION Removal
  1. Remove the driver airbag module.

    (Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  2. Remove the steering wheel.

    (Refer to "STEERING COLUMN AND SHAFT ")

  3. Remove the steering wheel cover (A) after loosening the screws.
    Fig 1: Identifying Steering Wheel Cover And Screws
    G08810964Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the steering wheel remote control switch connector (A).

    [LH - AVN/Handsfree]Β 

    Fig 2: Identifying Steering Wheel Remote Control Switch Connector
    G08810965Courtesy of HYUNDAI MOTOR AMERICA

    [RH - Cruise]Β 

    Fig 3: Identifying Steering Wheel Remote Control Switch Connector
    G08810966Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the steering wheel remote control switch (A) after loosening the mounting screws.
    Fig 4: Identifying Steering Wheel Remote Control Switch
    G08810967Courtesy of HYUNDAI MOTOR AMERICA
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.