Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014ACCENT GS, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 54 (AUDIO/VIDEO/NAVIGATION (AVN) SYSTEM)SPECIFICATIONSSPEAKER SPECIFICATIONS
2014 Hyundai Accent GS, Standard Trans
Speaker Specifications
2014 Hyundai Accent GS, Standard TransSECTION Speaker Specifications
WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
SPEAKER SPECIFICATIONS
| Item | Dimension | Infinity | |
|---|---|---|---|
| Input Power (W or V) | Front | 20W (Max 40W) | 25W (Max 50W) |
| Rear | 20W (Max 40W) | 25W (Max 50W) | |
| Front Center | 20W (Max 40W) | 20W (Max 40W) | |
| Front Tweeter | 20W (Max 40W) | 13W (Max 25W) | |
| Surround | 15W (Max 30W) | 25W (Max 50W) | |
| Sub woofer | 20W per channel (Max 40W) -2 channels | 25W per channel (Max 50W) -2 channels | |
| Speaker Impedance (Ω) | Front | 1.8 ± 0.3 | 2.1 ± 0.3 |
| Rear | 1.8 ± 0.3 | 2.0 ± 0.3 | |
| Front Center | 2.6 ± 0.4 | 2.0 ± 0.3 | |
| Front Tweeter | 4 ± 0.6 | 4 ± 0.3 | |
| Surround | 1.8 ± 0.3 | 1.9 ± 0.3 | |
| Sub woofer | 2.0 ± 0.3 | 5.0 ± 0.8 | |
| Speaker Number | 10 | 10 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.