Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2013 Hyundai Santa Fe Sport Base, FWD
Quick Lookups: Fluids
2013 Hyundai Santa Fe Sport Base, FWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.40 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.35 LBS. | 0.61 KG | R-134a | S | |||
| Automatic Transmission Fluid | 2.4L Eng | 7.50 QTS. | 7.09 L | MICHANG ATF SP-IV SK ATF SP-IV, NOCA AFT SP-IV, HYUNDAI genuine ATF SP-IV or other brands meeting the specifications approved by Hyundai Motor Co., | S | ||
| Brake Fluid | 0.70 QTS. | 0.66 L | FMVSS116 DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Engine Coolant | 2.4L Eng | 7.51 QTS. | 7.1 L | 50/50 mixture of Ethylene Glycol Antifreeze and distilled water | The engine coolant should be compatible with aluminum engine parts. | S | |
| Engine Oil | Drain and Refill,w/Filter | 4.86 QTS. | 4.59 L | API - SM, ILSAC GF-4 or Above. ACEA A5 (or Above). For better fuel economy, it is recommended to use SAE 5W-30. SAE10W-30 Above 0Deg. F (-18Deg C) | If API service SM engine oil is not available you may use API service SL. Hyundai recommends Quaker State. | S | |
| Fuel Tank | 17.43 GALS. | 65.97 L | S | ||||
| Transfer Case Fluid | 0.63 QTS. | 0.59 L | Hypoid Gear Oil API GL-5, SAE 75W-90 | SHELL SPIRAX X or equivalent. | S | ||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.