Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013SANTA FE AWD L4-2.4LREPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMKEYLESS STARTING SYSTEMSERVICE AND REPAIRSMART KEY SYSTEMREPAIR PROCEDURES
2013 Hyundai Santa Fe AWD L4-2.4L
Repair Procedures
2013 Hyundai Santa Fe AWD L4-2.4LSECTION Repair Procedures
Smart Key
Smart Key Code Saving
1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.
2. Select the vehicle model and then do "Smart key code saving".
3. After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.
4. After having the teaching smart key, push "ENTER" key.
5. Input the "Pin code" for first key teaching.
6. Press the SSB with smart key within 5 sec after pressing "OK".
7. Confirm the message "First key teaching completed".
8. Press the SSB with smart key within 5 sec after pressing "OK".
9. Confirm the message "Second key teaching completed".
10. Then the screen will be shown as below when key teaching process is completed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.