2012 Hyundai Veracruz GLS, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Front & Rear A/C 7.40 OZS. 0.21 L PAG 46 S
Air Cond Compressor Oil w/Front A/C 5.40 OZS. 0.15 L PAG 46 S
Air Cond Refrigerant Front and Rear 1.98 LBS. 0.89 KG R-134a S
Air Cond Refrigerant Front 1.54 LBS. 0.69 KG R-134a S
Automatic Transmission Fluid 7.40 QTS. 7 L TFF Automatic Transmission Fluid T IV JWS 3309, Mobil ATF 3309, 3309 US ATF or other brands meeting the JWS 3309 specification approved by Hyundai Motor Corp. S
Brake Fluid 0.70 QTS. 0.66 L FMVSS116 DOT 3 or DOT 4 Brake Fluid As required. S
Differential Gear Oil Rear 0.95 QTS. 0.89 L Hypoid Gear Oil, API - GL-5, SAE 75W-90 (SHELL SPIRAX X or equivalent) S
Engine Coolant 11.10 QTS. 10.5 L 50/50 mixture of Ethylene Glycol Antifreeze and water The engine coolant should be compatible with aluminum engine parts. S
Engine Oil 5.49 QTS. 5.19 L API - SM, ILSAC GF-4 or Above, SAE 5W-20, 5W-30. For better fuel economy, it is recommended to use SAE 5W-20. SAE10W-30 Above 0Deg. F (-18Deg C) If API service SM engine oil is not available you may use API service SL. For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-20 (API SM/ILSAC GF-4). Hyundai recommends Quaker State. S
Fuel Tank 20.60 GALS. 77.97 L S
Power Steering Fluid 0.95 QTS. 0.89 L Power Steering Fluid Type 3 S
Transfer Case Fluid 0.85 QTS. 0.8 L Hypoid Gear Oil, API - GL-5, SAE 75W-90 (SHELL SPIRAX X or equivalent) S
Windshield Washer Fluid N/A N/A Use a good quality windshield washer fluid, diluted with water as necessary. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.